Description
Additional Information
Turning Speeds & Feeds
LMF+ Chipbreaker
| General Cutting Parameters Depending on the Application | Cutting Data | |||
|---|---|---|---|---|
| metric | inch | |||
| Work Piece Material |
Type of Treatment/Alloy |
Hardness HB |
ACM15S vc [m/min] |
ACM15S vc [sfm] |
| Cast Iron | Grey Cast Iron | 180 | – | – |
| Cast Iron | Spheroidal Cast Iron | 160 | – | – |
| Cast Iron | Malleable/Tempered Iron | 130 | – | – |
| Cast Iron | – | 100 | 100 – 2000 | 328 – 6562 |
| Non-Ferrous Metals | – | 130 | 100 – 800 | 328 – 2625 |
| Non-Ferrous Metals | – | 90 | 100 – 600 | 328 – 1969 |
| Non-Ferrous Metals | – | 100 | 100 – 300 | 328 – 984 |
| Exotic | Fe Base | 200 | 30 – 45 | 98 – 148 |
| Exotic | Nickel or Cobalt Base | 280 | 20 – 35 | 66 – 115 |
| Exotic | Nickel or Cobalt Base | 250 | 20 – 35 | 66 – 115 |
| Exotic | Nickel or Cobalt Base | – | 18 – 30 | 59 – 98 |
| Exotic | Titanium | Rm 440* | 60 – 120 | 197 – 394 |
| Application Chip Groove |
Depth of Cut / Feed Rate | |||
|---|---|---|---|---|
| metric | inch | |||
| ap [mm] | f [mm] | ap [inch] | f [inch] | |
| LMF+ | 0.05 to 1.35 | 0.02 to 0.10 | 0.002 to 0.053 | 0.001 to 0.004 |
Ex: CCGT 120408FNLMF+ for 304
| Different in Each Application | ||
|---|---|---|
| Consistent Cutting Depth |
Inconsistent Cutting Depth |
Interrupted Cut |
| ● | ● | ○ |
● = Primary application
○ = Secondary application
× = Does not apply
* The tensile strength Rm is determined with a tensile
test (e.g. in accordance with the ISO 6892 series of standards
(for metallic materials), or the ISO 527 series of standards
(for plastics and composites).
test (e.g. in accordance with the ISO 6892 series of standards
(for metallic materials), or the ISO 527 series of standards
(for plastics and composites).
